Why is my engine misfiring or idling rough?
Quick answer
Misfires are most often caused by worn spark plugs, failing ignition coils, or vacuum leaks. They typically trigger codes P0300-P0308.
Each cylinder needs the right mix of air, fuel, and spark. If any is missing, that cylinder fails to fire and the engine shakes, especially at idle.
Codes P0301 through P0308 identify the specific cylinder; P0300 means random or multiple misfires.
Common causes
- Worn spark plugs
- Failed ignition coil
- Clogged or leaking fuel injector
- Vacuum leak from cracked hose
- Low compression
Tools needed
Diagnose & fix: step by step
- 01Read the misfire code to identify the cylinder.
- 02Swap the coil with a neighboring cylinder and see if the misfire follows.
- 03Inspect spark plugs for wear, oil, or carbon fouling.
- 04Listen for hissing vacuum leaks around the intake.
- 05Perform a compression test if plugs and coils are good.
Pro tip:Spark plugs on most modern engines are torqued to about 13-20 ft-lbs - check your spec.
Was this helpful?
Be the first to rate this answer
Related questions
What causes a knocking noise from the engine?
Knocking can come from low oil, using the wrong fuel octane, worn rod bearings, or carbon buildup. Deep rhythmic knocking that increases with RPM is serious.
Why does my car hesitate or lose power when accelerating?
Common causes include a clogged air filter, dirty mass airflow sensor, weak fuel pump, clogged fuel filter, or a restricted catalytic converter.