Why are my brakes squeaking or grinding?
Back to category

Why are my brakes squeaking or grinding?

High urgency Intermediate $150 - $450 per axle 1 - 2 hrs

Quick answer

High-pitched squealing usually means the pad wear indicators are touching the rotor. Grinding means metal-on-metal contact - replace pads and inspect rotors immediately.

Most brake pads have a small steel tab called a wear indicator that squeals when the friction material is down to about 2-3 mm. It is designed to be annoying so you replace pads before damage occurs.

Grinding means the pad backing plate is cutting into the rotor. This reduces stopping power and usually requires new rotors as well as pads.

Common causes

  • Worn pads hitting wear indicators
  • Glazed pads or rotors
  • Moisture / surface rust (squeak goes away after a few stops)
  • Missing anti-squeal shims or grease
  • Metal-on-metal from fully worn pads (grinding)

Tools needed

Jack & jack standsLug wrenchC-clamp / caliper toolSocket setBrake grease

Diagnose & fix: step by step

  1. 01Look through the wheel spokes to check pad thickness - under 3 mm needs replacement.
  2. 02Remove the wheel and inspect rotor surface for deep grooves or a lip.
  3. 03Replace pads in axle pairs (both sides).
  4. 04Resurface or replace rotors if scored or below minimum thickness.
  5. 05Lubricate caliper slide pins and bed in the new pads.

Pro tip:Torque lug nuts to spec in a star pattern - typically 80-100 ft-lbs for passenger cars.

Was this helpful?

100% of 1 drivers found this helpful

Still stuck? Ask a follow-upGet advice specific to your vehicle's year, make and model.

Related questions

GearHead Repair Desk

Information is for general guidance only. Always follow your vehicle's service manual and consult a certified technician for safety-critical repairs like brakes, steering, and fuel systems.

Install GearHead

Opens like an app. Saved answers work even with weak signal.