Why is my check engine light on?
Back to category

Why is my check engine light on?

Medium urgency Beginner $0 - $2,500 10 min diagnosis

Quick answer

The check engine light (CEL) means your engine computer stored a fault code. It can be as minor as a loose gas cap or as serious as a misfire.

The Malfunction Indicator Lamp is triggered when the powertrain control module (PCM) detects a sensor reading outside its expected range. Every fault stores a 5-character OBD-II code such as P0420 or P0300.

A steady light means a fault that should be checked soon. A flashing light means an active misfire that can overheat and destroy the catalytic converter - reduce speed and get it checked immediately.

Common causes

  • Loose or damaged gas cap
  • Faulty oxygen (O2) sensor
  • Worn spark plugs or ignition coils
  • Failing catalytic converter
  • Mass airflow (MAF) sensor issue
  • Vacuum leak

Tools needed

OBD-II scanner ($20-$60)Flashlight

Diagnose & fix: step by step

  1. 01Tighten the gas cap until it clicks and drive 2-3 days.
  2. 02Plug an OBD-II scanner into the port under the dashboard (driver side).
  3. 03Read and write down every stored code.
  4. 04Look up the code meaning and check freeze-frame data.
  5. 05Fix the root cause, clear the code, and confirm it does not return.

Pro tip:Many auto parts stores will read your codes for free.

Was this helpful?

Be the first to rate this answer

Still stuck? Ask a follow-upGet advice specific to your vehicle's year, make and model.

Related questions

GearHead Repair Desk

Information is for general guidance only. Always follow your vehicle's service manual and consult a certified technician for safety-critical repairs like brakes, steering, and fuel systems.

Install GearHead

Opens like an app. Saved answers work even with weak signal.